Wheat Watch: Season 4 - A Day in the Harvest Life

There were a lot of ups and downs during this wheat season.  We planted our wheat and it came up great.  Then we had basically no moisture during the winter time and a lot of our wheat was winter killed.  Then we had about 13 inches of rain in a two month period this spring, next because of the moisture we had issues with a fungus called rust.  We didn't really have any idea what our crop was going to be like when we actually got to run our combines through it.  Below is a typical day in my life during wheat harvest. 

5:40 A.M. -  I wake up before my alarm goes off and I lay there and think about things that need to get done in order to get everyone going for the day.  I soon realize it is a waste of time to try to go back to sleep and I get up to brush my teeth.  About the only thing that breaks my mind away from harvest is the thought of coffee - the sweet nectar of the sleepless.

5:55 A.M. - Where is the coffee...?  Oh, my wife was up all night with our infant son so I'm on my own.  I stumble to the coffee machine and start making a double, make that triple, espresso.  I eat a bowl of cereal and contemplate how many acres I could get done in a day if EVERYTHING went as planed.

6:00 A.M. - I check the National Weather Service website for the forecast for day and the rest of the week.  Chances of rain tonight.  Wonderful.  Typically I would be happy about rain but all rain does during harvest is slow you down.

6:20 A.M. - I let my dog out of her pen and head for my pickup.

6:45 A.M. - I arrive at the field where we left our combines the night before and start to look them over.  There are 64 grease zerks on each combine and in order to reach them all we have to spend 3 hours climbing around all over them.  Typically that job falls to the newest guy on the harvest crew.  Mainly because it's the worst job and if you are not careful you end up with a bunch of grease all over you.

6:51 A.M. - I start pulling the safety shields off one of the combines and I notice that there is a belt that runs a major portion of the combine that is literally hanging on by a thread.  I call my father-in-law and send him on a part locate and procure mission.

7:00 A.M. - Our harvest crew starts to arrive and the new guy is handed the electric grease gun.  He LOVES to grease!

7:07 A.M. - Our combine service vehicle and fuel trailer arrives and we start fueling our combines in the field. 

7:10 A.M. - Once everyone has arrived and is working on their daily tasks, I start to check off the NASA launch list of things that need to be operational before we start.  Belts and chains need to be tight and in good shape.  There are six tires on each combine and they all need to be at a specific air pressure.  Engine Oil, transmission oil and hydraulic oil levels all need to be correct.  Windows need to be cleaned.

 

7:12 A.M. - I don't think a triple espresso is enough today.  I remember my wife told me about a coworker that used to order a quad americano.  I'm not sure what that is but it sounds like it has a lot of caffeine.  I make a mental note to look into that.

7:35 A.M. - One of our guys starts taking off the bad belt.  Of course this belt is behind three other belts and will take 30 minutes just to take the old one off.  I dislike you John Deere combine design engineer.

8:00 A.M. - The combines are fueled and we need to use our portable air compressor to blow out all the air filters and radiators.  Wheat harvest is a very dusty enterprise.  This causes the radiators and air filters to plug up.  So everyday we blow out three radiators per combine and three air filters per combine.

8:17 A.M. - I check the weather forecast again but this time for the relative humidity.  It is still pretty high at 67 percent.  At a higher retaliative humidity the wheat straw is tougher and is harder for the combine to process. In order for the wheat to be ready to cut I want to see the humidity below 50% but really the lower the better. 

9:11 A.M. - Father-in-law arrives with the replacement belt and we start to put it on.

9:16 A.M. - At this point the new guy is wearing more grease than he has actually got in the combine.  He tells me that he's done.  I start verifying that they have all be greased; I take my job as the Zerk Czar seriously. 

9:20 A.M. - They haven't all been greased and he gets to start in on the zerks he missed. YAY!

9:30 A.M. - Relative humidity is at 59%

9:32 A.M. - New guy says he's done again.  He's not.

9:41 A.M. - The new guy is finally done greasing.  He has been tared with grease and feathered with wheat straw but now the combines are greased to my Czarist's delight. 

 

9:45 A.M - We start all three combines to allow the engines to warm up.  Diesel engines require a little bit of warm up time to ensure that all the parts are warmed up and well lubricated. 

9:50 A.M. - We start up the combine harvest machines and soak all the roller chains with used oil.  We've found that this extends the life of the chains dramatically.

10:00 A.M - All three combine operators are in their combines and are ready to start cutting wheat.

10:10 A.M - Relative humidity is at 43%.

10:15 A.M - The combines are rolling through the wheat field and I get in the tractor and start operating the grain cart.  When we have three combines going in good wheat the grain cart never stops moving.  No rest for the wicked.

 

11:35 A.M. - We've been running for a little over an hour and its time to eat a snack while I unload the grain cart on a semi.

3:45 P.M. - I commend myself for getting all three of these combines ready before harvest.  They are running GREAT!

3:46 P.M - Two combines are broke down.

3:50 P.M. - Investigation ensues.

4:30 P.M. - I figure out what is wrong with #3 combine.  The header sickle section is broke and I fix the break with a metal splice that splints the two pieces of sickle together. 

4:45 P.M. - My father-in-law is looking at combine #2.  I start to walk over to see if I can help and as I'm getting close, all I see is him running to his pickup yelling something about "GETTING IT ORDERED BEFORE THEY CLOSE!".   After the dust settles from him driving away, I look to see what he is talking about.  One of the main augers on the bottom of the combine just broke in two.  I briefly consider the fact that this is going to cost a lot of money and we will probably be down until next Wednesday while we wait for the parts for this combine.

4:47 P.M. - EXCEDRIN!

5:00 P.M. - The header is broke again on combine number 3.  The splice fixed the sickle for a total of 12 minutes.

5:20 P.M. - I get a call from my Father-in-law.  Surprisingly, the John Deere dealership had the auger to replace the broken one on combine #2.  It costs 600 bucks.  I consider all the things that I would like to spend $600 on rather than an auger for the combine.  600 cups of coffee perhaps?

5:35 P.M. - My father-in-law finds out that the dealership did have the auger but "sorry" the bearings and other parts needed to replace the auger are in another dealership a hour away. 

 6:00 P.M. - After trying to splice the #3 combine sickle a second time and having a second failure we are going to need to do some serious farm engineering or order some parts.  It's a Saturday night and we've been running hard for 6 days.  It's best to give my sleep deprived, caffeine addled brain a rest before engineering a fix on Monday morning.  I send #3's operator home.

6:21 P.M. - I'm back in the grain cart keeping my one remaining combine going.

8:50 P.M. - The sun is starting to go down and it's time to shut it down.  In Western Kansas when the sun goes down the temperature almost immediately drops 20 degrees.  Cool temperatures don't go well with cutting wheat.

9:00 P.M. - We top off the last truck of the night.  

9:20 P.M. - We start to move all the machinery that needs repairs to our shop. 

9:30 P.M. - After hauling everyone to their vehicles and double checking that everything is turned off we are done for the day.  

9:45 P.M. - I eat dinner and I'm pretty much worthless at this point.  We don't harvest on Sundays on our farm so I'll be happy to get some rest the next day and I'll start making a plan on how to get our 2 combines fixed.

10:20 P.M. - I'm out cold.

I have to admit the day I've written about is about was the craziest one of harvest.  Most of the days we didn't have as many problems and we ran well.  After all the ups and downs that we had this season, our yields turned out to be the best we've had since I've been back.  One of the best things about farming is the satisfaction of producing a good crop.

-Zerk Czar Ryan

I'd like to dedicate this post and harvest to my Grandpa Marvin who passed away this year.  Marvin was a wheat custom cutter for years and started in Texas and cut wheat "all the way up to Canada" 10 times.  I can only imagine what kind of crazy harvest days Marvin had when he was harvesting wheat for 6 months at a time.

Marvin we miss you and I wish I could tell you about this year's harvest!

Just What The Doctor Ordered

This year we tried out variable rate prescriptions for applying fertilizer.  At the beginning of the year we grid sampled some of our irrigated acres in order to try to solve some problems we have been having.  Grid sampling is the process of collecting soil samples in an organized fashion.  A GPS system is used to create a grid and will guide the user to the appropriate location to take a sample.  The sample is then tagged with the longitude and latitude of the sample soil and sent to a test lab.

The lab then runs tests on the soil fertility for each sample.  All the samples are then complied and used to create a fertility map.  A fertilizer prescription is created in order to address the fertility deficiencies throughout the field.  After the prescription is created it is then loaded into our guidance system.  The guidance system then communicates with the strip tiller, via a rate controller, the amount of fertilizer it is dispensing at every point in the field.  Below is a picture of the variable rate map that we created.  Each color change in the map represents a change in the amount of fertilizer being applied.  Once I started creating the map I decided I wanted to do a test strip in the middle of the field.  I wanted to test how much of an increase in yield I would see with an increase in the fertilizer rate.  Now that we have yield mapping on our combines I can view the results as soon as we pick the corn in the field.

We are just in the beginning phases of using variable rate fertilizer but in the future I would like to vary the rate of seed population, fertilizer, and the rate of irrigation throughout our farm.  Using variable rate applications will allow our farm to be more efficient in its use of input costs. 

-Field Pharmacist Ryan

Calving Season

Calves have been dropping like rain drops on our farm over the last month.  We have lots of little babies running around and that's one of the funniest things to watch on the farm.

Fun Farm Fact: Cows have cow friends.  Most of the time when you see one cow you'll see her with the same group of cows almost every time.  The best part is that when the cows have young calves the Moms baby sit for each other.  You can find one Momma cow with 4 or 5 calves around her when you get close to their babies the other Moms come back to make sure their baby is OK.

-Rancher Ryan

Wheat Watch: Season 4: Episode 2 - WINTER KILL

Winter kill might sound like a bad horror film but it's actually what happened to some of our wheat.  It occurs when the ground temperature drops below freezing in the root zone of the wheat plant. 

In a typical year with wetter soils the ground insulates the wheat.  When the soil lacks moisture the insulation value goes down which leaves the wheat more susceptible to winter kill.  Quick temperature changes can also be a factor in the amount of damage.  If there is a very mild fall and then a cold snap hits, the wheat doesn't have time to build hardiness to handle the cold temperatures.

As my father-in-law and I were looking at some of our fields he said that sometimes as a farmer all you can do is just close your eyes and hope for the best. 

-Sightless and Hopeful Farmer Ryan

Farmerversary

I became a farmer exactly three years ago today.  It's funny to think back about how green I was when I started: I didn't know how to drive a tractor, I had never worked with cattle and I'd only backed up a trailer one time (unsuccessfully). 

One of the most important things I've learned in the last three years is that if you have a chance to try something new - DO IT!  It is amazing the things you that you will learn when you are outside of your comfort zone.

-Farmer Ryan

Leweasyanna

So what do farmers do when they get away from the farm?  They visit other farms.  My family recently visited the great state of Louisiana and when we were there I was able to see a different type of farm.

The farm we visited raised rice and some soybeans.  I was surprised to find out that they also raise crawfish.  After they harvest rice they choose between getting a second cutting of rice or "seeding" their fields with small crawfish they called peelers.  Either way they flood the field again and wait for their crops or fish to grow.  

In late winter/early spring when the water starts to warm up the crawfish come up from the mud and start looking for food.  That's when the crawfish traps are baited and setup.  Everyday during the crawfish season a boat goes out into the water and checks each of the traps.  The boats use a little wheel that is powered by hydraulics to push the boat around the field to pick up the fish.

One of the first things that we ate when we made it to Louisiana was crawfish.  We bought about 14 pounds of of them from a crawfish shack off the highway (owned by the farmer we visited).  Once we got it home we poured all of them out on the table and started to dig in.  Eating crawfish is kind of an art and you have to learn how to get to the meat.  You pop the top half off and peel the bottom half off.  Being from the Midwest the closest thing I can relate this to is eating chicken wings or BBQ ribs.  I don't know what it is about food like this but why is it all spicy?

-Agrotourist Ryan

P.S. - After being in Louisiana for a week I say "y'all" a lot more.  I'm pretty sure after a year of living there I would have an accent. 

Put It On Black

Grain commodity prices are down and cattle prices are up, so for our farm it's time to change our operation.  Again.  Ogallala Livestock Auction is based in Ogallala Nebraska and it is about 2.5 hours away from our farm.  On the day we went to buy some more cattle they were selling 7000 head in one day.  So we had a pretty good selection for the type of cattle we were looking for.  In my semi-delirious state on the way to the auction I started singing this to myself:

 Sing to the tune of "Deck the Halls"

Time to wake up at 4 o'clock

Oga la la la, la la la 

It is time to buy us some livestock

Oga la la la, la la la

Lets take a look at some bred cows
Oga la la la, la la la
7000 head for us to browse
Oga la la la, la la la

Don we now our cowboy apparel,

Oga la la la, la la la

It's time to put some dollars at peril

Oga la la la, LA LA LA

At the sale our farm purchased some cattle and for the first time I bought some cattle of my own.  With sweaty palms I signed the second biggest check of my life and put it all on black (Angus).  Viva Las Vegas.

-Horrible song writer and Rancher Ryan

So... What would you say you do here?

After our corn has been harvested and our equipment has been cleaned and put away for its winter hibernation, the farm work starts to slow down.  So what do we spend all our time doing?

We still have cattle to manage and they are actually the most work during this time period.  We have to make sure that they have enough to eat and they have the right mineral and protein supplements.  Most cold mornings we spend some time breaking ice that has formed on the top of the stock tanks in order for cattle to have access to water.  We also have to make sure that the electric fence is hot and the cattle are happily inside the fence.

There is a amazing amount of paper work that comes with being a farmer and winter time is when we get to do the most.  We have to account for every acre we farm and ranch by reporting what we planted and where to the government throughout the year.  After we've satisfied Uncle Sam we have to head over to our crop insurance agents and fill out basically the exact same thing for a second time.  The cherry on the top of our paperwork sundae is figuring our yearly tax bill.  Hooray for taxes!

Probably the best thing about the winter is going to farm conferences.  This month I attended the Cover Your Acres Conference.  Cover Your Acres is a Northwest Kansas farm conference that focuses on issues that are affecting our area.  This is important to me because the type of farming we do in Western Kansas is a lot different than the type of farming they do in Iowa.  Surprisingly, many of the big agricultural companies still haven't figured this out and they try to sell us things that just do not work here.  I also attended the Farm Bureau: Young Farmer and Rancher Conference.  This conference brings together young farmers and ranchers from across Kansas.  The main focus of this conference is overall trends in farming and issues facing all Kansas farmers.  It's also just a lot of fun to get to talk to other young farmers from across the state.  I actually met a farmer that farms in Johnson County.  It is pretty interesting to hear some of the issues they face on the other side of the state.  At one point in time he actually said "We do that to burn moisture".  This lead me to the conclusion that the grass really is greener on the other side (of Kansas).

-Winter Farmer Ryan

Happy MOOO Year!

Happy New Year everyone!

-Farmer Ryan